Chemical Agent Polyacrylamide PAM for industrial
Usage: Coating Auxiliary Agents,Plastic Auxiliary Agents,Rubber Auxiliary Agents,Water treatment chemicals
Thermal Decomposition Temperature℃：150-164
Gas Evolution ml/g: 118Min
Heat Loss: 0.15Max
Ash Content: 0.1Max
PH:6.5-7.5
Packing: 25kg/bag,carton
Apperance: White powder
| Product Name | Cationic Polyacrylamide | Anionic Polyacrylamide | Nonionic Polyacrylamide |
| Apperance | White Grain Powder | White Grain Powder | White Grain Powder |
| Lonization Degree | 5%-60% | / | / |
| Hydrolysis Degree | / | 15%-30% | 0%-5% |
| Solid Content | ≥90% | ≥90% | ≥90% |
| Dissolution Time | ≤90Minutes | ≤90Minutes | ≤90Minutes |
About the Usage of Polyacrylamide
Polyacrylamide can not be put directly into sewage, so dissolve in water before using polyacrylamide.
The dissolved water should be clean water and with out heating, but the temperature can not be cold. The tempeature is higher than 5 degrees ceisius. Otherwise it will be dissolved slowly. Temperature above 40 degrees celsius will affect the use effect.
Notice: Do not use strong acid ,strong base, high salt water preparation.
The ratio range is recommended to be between 0.1% and 0.3%. For example, 1 liter of water with 1~3g of agents.
If because of other reasons, the dispersion is not good, wo suggest that you mix a little more sparse.
The water is warmer in Summer, Catuonic,Anionic Polyacrylamide should be strict for about 1 hour. Nonionic Polyacrylamide should be strict for about 2 hours.
The water is cold in Winter, Cationic, Anionic Polyacrylamide should be strict for about one and a half hours. Nonionic Polyacrylamide should be strict for about 3 hours
Hot Tags: polyacrylamide, China, manufacturers, suppliers, factory, cheap, discount, quotation, low price, free sample, Resin, Sodium Methylate 30 , N Butyl Methacrylate Industrial Grade
