Product description:
Liquid Bright Gold for ceramics is available in glossy versions for use on earthenware or pottery.
Product parameter:
|
Product description
|
Liquid Bright Gold for ceramics is available in glossy versions for use on earthenware or pottery. It's used for the marbling
technique in particular. The liquid gold brings a refined touch in a classic technique. The effect is sure and the result is professional. Precious metals and lustres for ceramic decoration contain mixtures of gold, silver, platinum, and palladium along with other trace metal additives. |
|
Application
|
Ceramic art
|
|
Material
|
Acid, gold, silver, bismuth, resin, turpentine, essential oil, etc
|
|
Appearance
|
Dark brown liquid
|
|
Firing range
|
Porcelain - 780°C (1436°F) - 880°C (1616°F)
Bone China -750°C (1380°F) - 880°C (1616°F) Vitreous China - 750°C (1380°F) - 850°C (1560°F) Earthenware - 650°C (1200°F) - 740°C (1365°F) |
|
Purity
|
5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%
|
|
Specification
|
10g, 50g, 100g, 1000g
|
|
Peculiarity
|
Gold bright color, containing precious metals, etc
|
|
Application
|
On white china.
As a base for Roman gold. On bisque (produces a matte effect). For banding. Over fired lustres. On etched china or porcelain. On glass. |
|
How to use and apply 24k liquid Gold for ceramics?
|
The liquid gold application should usually be on glazed objects, thoroughly clean, and should be kept moisture-free. Be sure to use brushes only for these materials, with various one for gold or for platinum. Apply 24k liquid gold 2 gram on ceramics carefully with a brush or a pen. The best is to apply two layers. Be careful as gold dries quickly! Slow down 24k gold drying with the appropriate thinner. The bright precious metal liquids for brush application are ready to use. They can be applied without further thinning and distinguish themselves by their excellent application properties.
The high quality of the liquids used is an absolute prerequisite for manufacturing high-quality products. The quality of decoration, however, depends on the preparation, application, substrate surface, and firing conditions. Please note that the information included is for guidance only. Different application methods and different firing conditions will affect results. Metal lustres for ceramic decoration products such as resinates for industrial and electronics use have different firing ranges. |
|
Means of use
|
Liquid gold is suitable for direct brushing, mechanical boundary marking and spraying
|
|
Tips On Application & Firing
|
Do not apply too heavily as it will blister in the firing.
If applied too thinly, a purplish marking will result after firing. In that case reapply and fire again. Liquid bright gold will creep against graphite pencil lines, carbon paper markings, or wet paint and produce the same purplish marks after firing. Clean surfaces well before application with denatured alcohol or methylated spirits. Do not use turpentine as it will also creep against a surface cleaned with turpentine. It will also creep against a surface marked by a fingerprint. Normally, this gold will keep indefinitely when kept tightly sealed. Do not thin unless it has been exposed to the air for extended periods. To thin use lavender oil sparingly. Always allow the liquid gold to dry naturally before firing. Firing temperature for liquid bright ranges from 560°C/1040°F to 820°C/1508°F. Good ventilation of the kiln is most important as the gold can become hazy or dull if the ventilation is poor. |
|
Instructions
|
1. Place a small amount of overglaze on a glazed palette;
2. Apply one smooth coat. 3. Try to attain an even tint: 4. Premium Gold tint should be red in colour. 5. Bright Gold tint should be brown in colour. 6. White gold tint should be green in colour. 7. Do not let metallics pool in an area; brush them out smoothly. 8. Clean brush in Lustre Thinner and let dry. |
|
Health & Safety notes
|
These colours contain lead, cadmium and other metals which may be hazardous to health if swallowed.
It is important to store these colours safely away from children. Do not smoke, drink or eat when working with these colours. |
|
MOQ
|
10 grams
|
|
Packing
|
Plastic or glass bottle with a cap, factory sealed
|
|
Certificate
|
MSDS
|
|
Delivery time
|
7-15 Days
|
|
Shipping Method
|
EMS DHL TNT UPS FEDEX
|
Color card:

Product parameter:

Product details:

Product effect:



How to use the liquid gold?

Packaging:

Delivery:

Company profile:

Hot Tags: 24k precious metal pigment liquid bright gold, China, manufacturers, suppliers, factory, cheap, discount, quotation, low price, free sample, High Temperature Ceramic Pigment, Thermochromic Pigment, Middle Temperature Ceramic Pigment







