Frozen Effect Glass Frosting Powder For Glass
Frozen Effect Glass Frosting Powder For Glass

Frozen Effect Glass Frosting Powder For Glass

Frozen effect glass frosting powder for glass
Send Inquiry

Scope of application: Glass Frosting powder is suitable for all common glass based on soda lime silica, such as utensil glass, bottle glass, window glass, plate glass, process glass, cosmetic glass, etc. Product features: It is easy to use, easy to operate, quick frosting, wide adaptability, low cost, in line with the requirements of environmental protection, and not affected by the change of external conditions Deployment: 1. Prepare sand coating solution 24 hours before construction. 2. Smectite Powder: industrial hydrochloric acid = 10:5; The preparation process is as follows: in a plastic container containing 100 kg of matte powder, 50 kg of industrial hydrochloric acid (concentration greater than or equal to 31%) is added while stirring, and the mixture is stirred well, the cover is covered and used after curing. 3. The newly prepared montmorillonite solution is viscous and cold. The initial temperature will drop to about - 10 ℃. After 20-24 hours of aging, the temperature of the montmorillonite solution will return to room temperature and the consistency of the montmorillonite solution will return to normal state. At this time, the montmorillonite solution can be used. Operation method: 1. Immerse the clean glass products in the evenly stirred frosting solution for 15-40 seconds, take out and dribble for 10-15 seconds (to recover the frosting solution), and then clean directly. The frosting time is mainly determined by the room temperature during operation, the chemical composition of the glass products and the single or double side frosting of the glass products. 2. At the beginning of use, the frosting solution has strong masking power and short frosting time; After a period of masking, the time of masking is relatively longer. Generally, after 6-8 hours of frosting, it is necessary to supplement the frosting fluid to increase the masking power and recycle the frosting fluid. 3. Spray or scrub with tap water, or soak with 10-15% dilute hydrochloric acid solution or 6-10% dilute sulfuric acid solution, and then rinse with clean water. The washed glass products can be dried by natural air drying or hot air blowing. matters needing attention: 1. It is suitable to operate in a ventilated environment, wear rubber gloves and protective glasses. If your eyes touch the matte powder, please clean it with clean water immediately. 2. Main ingredients: ammonia fluoride

Hot Tags: frozen effect glass frosting powder for glass, China, manufacturers, suppliers, factory, cheap, discount, quotation, low price, free sample